Licensed & Insured, in Wichita Falls and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Wichita Falls
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (940) 400-3876 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Wichita Falls and surrounding areas · On-site visits included · Free estimate within 24h
Wichita Falls Metal Roofing is a team of local certified professionals based in Wichita Falls. We respond quickly in Wichita Falls and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (940) 400-3876⭐⭐⭐⭐⭐ 4.9/5 · 152 verified Google reviews
“Needed a metal shelter built out at our place in Archer City and these guys knocked it out in two days. The panels are straight, screws are all lined up, and they cleaned up every last scrap. Really pleased with how it turned out.”
Commercial & Agricultural Metal Roofing
“We wanted to cover the old shingles on our brick house's front porch area instead of tearing everything off, and Wichita Falls Metal Roofing handled the retrofit perfectly. They walked me through how the panels would sit over the existing roof and the flashing around the porch tie-in looks seamless. Took about three days for the crew of four.”
Metal Roof Over Shingles (Retrofit)
“Our old hay barn out in the rural part of Henrietta was leaking everywhere. They re-roofed the whole thing with corrugated panels and replaced a bunch of rusted screws. Solid work, fair price, and they actually showed up when they said they would.”
Commercial & Agricultural Metal Roofing
“Had a standing seam roof installed on our brick home and honestly it looks incredible. The crew was respectful, kept the yard clean, and finished in four days like they promised. Only small gripe was they started a little later than scheduled on day one, but the finished roof more than made up for it.”
Standing Seam Metal Roofing
“Called them about a leak in our steel panel roof after that last storm and they had someone out within two days. Turned out to be a bad flashing around the chimney. Fixed it fast and didn't try to upsell me on a whole new roof.”
Metal Roof Leak Repair
“Got a full metal roof inspection on our brick house before we listed it for sale. The report was thorough and they flagged a couple of loose screws and some worn sealant I never would've noticed. Honest folks, they told me the roof had plenty of life left instead of pushing a replacement.”
Metal Roof Inspection
“We went with stone-coated steel for our brick house and I'm so glad we did. It gives that classic look but holds up way better than shingles. The installation crew was top-notch and the finish on the panels is beautiful.”
Stone-Coated Steel Roofing
“Replaced our old brown shingle roof with a new metal one and couldn't be happier. They tore off the old shingles, checked the decking, and had the new roof on in under a week. Cleanup was spotless, not a single nail left in the driveway.”
Metal Roof ReplacementReal photos of our work in Wichita Falls · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener R-panel installation | Starting at $8/sq ft | Includes panels, high-temp underlayment, and standard trim; pitch and deck condition move the price. |
| Standing seam installation | Starting at $12/sq ft | Concealed fasteners and raised seams; panel gauge and roof complexity drive the final figure. |
| Stone-coated steel or metal shingle installation | Starting at $14/sq ft | Includes premium profile panels and trim; HOA and historic review may affect material choice. |
| Tear-off and deck repair | On estimate | Existing layers, soft sheathing, and access determine scope; needs an on-site look before pricing. |
| Complex or large-scale job | On estimate | Multiple roof planes, steep pitch, or outbuildings require an on-site assessment before a number is given. |
| Travel | Included | In Wichita Falls and surrounding areas, no separate call-out or mileage fee. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Snap-lock standing seam, standard finish | Starting at $10/sq ft | Includes tear-off, synthetic underlayment, trim and concealed clips; pitch and roof complexity move the price. |
| Mechanically seamed standing seam | Starting at $13/sq ft | Includes powered seaming on every rib and formed flashing; panel gauge and cut-up roof planes raise it. |
| Impact-rated standing seam with cool finish | Starting at $15/sq ft | Includes heavier gauge hail-rated panel and reflective paint; total square footage and deck repairs affect the total. |
| Deck repair or sheathing replacement | On estimate | Needs an on-site look because the amount of soft decking only shows after tear-off. |
| Travel | Included | in Wichita Falls and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (940) 400-3876, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam replacement | Starting at $12/sq ft | Includes tear-off, underlayment, concealed-fastener panels, and trim; roof pitch and valley count move the price. |
| Exposed-fastener R-panel replacement | Starting at $9/sq ft | Includes tear-off, decking inspection, ribbed panels, and screws; shop and barn size drives the total. |
| Stone-coated steel replacement | Starting at $13/sq ft | Includes tear-off, granulated steel tiles, and trim; complex roof geometry and dormers raise the rate. |
| Decking repair and flashing | On estimate | Rotten sheathing and chimney or skylight flashing need an on-site look before pricing. |
| Travel | Included | in Wichita Falls and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (940) 400-3876, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener R-panel retrofit | Starting at $7/sq ft | Includes battens, high-temp underlayment, panels and screws; pitch and deck condition move the price. |
| Standing seam retrofit over shingles | Starting at $11/sq ft | Concealed-fastener panels on battens; roof complexity and panel gauge drive the final figure. |
| Stone-coated steel or metal shingle retrofit | Starting at $12/sq ft | Textured panels on a batten grid; valleys, dormers and chimneys add detail labor. |
| Partial tear-off plus retrofit | On estimate | Needs an on-site look to confirm layer count, deck condition and how the two sections tie at the ridge. |
| Travel | Included | In Wichita Falls and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (940) 400-3876, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single panel or focused flashing repair | Starting at $450 | Includes inspection, one panel or flashing repair, new fasteners and sealant, normal roof access. |
| Screw replacement and reseal | Starting at $650 | Covers pulling backed-out or rusted screws, installing new fasteners, and resealing holes across a repair zone. |
| Multiple panel and valley repair | Starting at $1,200 | Includes several panel replacements, valley or penetration work, and water testing; price rises with roof height and pitch. |
| Chimney, skylight, or wall flashing rebuild | Starting at $850 | Covers removing failed flashing, checking deck and underlayment, and rebuilding the termination with new metal. |
| Storm damage and insurance documentation | On estimate | Full storm inspection, photo documentation, and written scope; final price depends on damage extent and panel availability. |
| Estimate and travel | Free, included | Free written estimate in Wichita Falls and surrounding areas, no separate call-out or mileage fee. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Diagnostic leak inspection and minor repair | Starting at $450 | Includes tracing the leak, replacing failed screws or resealing a small flashing gap. |
| Screw replacement and re-fastening (partial roof) | Starting at $650 | Replaces backed-out or missing screws with new gasketed fasteners across a section of roof. |
| Flashing rebuild at chimney or skylight | Starting at $850 | Removes failed sealant and rebuilds flashing; price rises with height and access. |
| Emergency tarping after storm | Starting at $350 | Temporary watertight cover to stop active leaks until permanent repair is scheduled. |
| Complex or large-scale leak repair | On estimate | Multiple leak points or seam failure need an on-site look before a number is given. |
| Estimate | Free | Response within 24 hours at (940) 400-3876, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Washer-only swap (small roof) | Starting at $750 | Covers pulling and replacing dried or cracked washers on a typical carport or small shop roof. |
| Oversized screw replacement | Starting at $950 | Replaces backed-out screws with oversized fasteners and UV washers; price rises with fastener count. |
| Full roof re-fastening | Starting at $1,400 | Every fastener on the roof replaced; taller pitch and larger square footage move the number up. |
| Panel re-seat and closure repair | On estimate | Needs an on-site look to see how far panels have lifted and whether decking is soft. |
| Travel | Included | in Wichita Falls and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (940) 400-3876, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof, simple slope | Starting at $5.50/sq ft | Includes panels, underlayment, screws and basic closures; pitch and tear-off move the price |
| R-panel roof on a home or garage | Starting at $6.00/sq ft | Includes ribbed panels, flashing at walls and valleys; cut-up rooflines add labor |
| Barn, shop or carport re-roof | Starting at $4.75/sq ft | Open-span panels over purlins; height, access and existing deck condition set the rate |
| Panel over existing shingles (where code allows) | On estimate | Requires deck inspection and layer count check before a number is given |
| Travel | Included | in Wichita Falls and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (940) 400-3876, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal shingle roof, standard pitch | Starting at $9/sq ft | Includes underlayment, standard flashing and cleanup on a walkable single-story roof. |
| Steep or complex roof | Starting at $12/sq ft | Steep pitch, multiple valleys and chimneys add labor and custom flashing work. |
| Retrofit over existing shingles | On estimate | Depends on existing layer count, deck condition and local code limits on recover. |
| Tear-off and full replacement | On estimate | We inspect decking and sheathing before quoting, since rot changes the scope. |
| Travel | Included | In Wichita Falls and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (940) 400-3876, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel, full tear-off and install | Starting at $9/sq ft | Includes tear-off, underlayment, panels, and trim; pitch and layer count move the price. |
| Retrofit over one shingle layer | Starting at $8/sq ft | Batten system over existing shingles where code allows; deck condition is the main variable. |
| Shake or architectural shingle profile | Starting at $10/sq ft | Premium textured finish; profile complexity and color choice affect material cost. |
| Repair and re-fastening | On estimate | Panel replacement and flashing reseal priced after an on-site look at the damage. |
| Travel | Included | In Wichita Falls and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (940) 400-3876, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper accent roofing (porch, bay window, dormer) | Starting at $20/sq ft | Includes custom-fabricated copper panels and trim; small square footage raises the per-foot rate. |
| Full copper standing seam roof | Starting at $28/sq ft | Includes concealed fasteners, soldered seams, and custom flashing; roof complexity and pitch drive the final number. |
| Zinc or aluminum specialty panels | Starting at $22/sq ft | Includes matte-finish panels and standard trim; access and tear-off of existing layers add to the cost. |
| Complex or large-scale job | On estimate | Multi-plane roofs, historic homes, and acreage shops need an on-site look before we quote a firm number. |
| Travel | Included | In Wichita Falls and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (940) 400-3876, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Reflective coating on sound panels | Starting at $2.50/sq ft | Includes wash, rust spot treatment and one reflective topcoat on standard R-panel or corrugated roofs. |
| Rust treatment and primer system | Starting at $3.25/sq ft | Adds rust converter, bare-metal primer and fastener prep where corrosion has started at laps and edges. |
| Two-coat color restore system | Starting at $4.00/sq ft | Base coat plus color topcoat for faded panels where appearance and heat reflection both matter. |
| Complex or steep roof | On estimate | Two-story roofs, dormers, valleys and cut-up panel layouts need an on-site look before we quote. |
| Travel | Included | In Wichita Falls and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (940) 400-3876, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single flashing repair | Starting at $600 | Covers one transition such as a chimney reflash, pipe boot or skylight reseal, with custom-bent metal included. |
| Chimney reflash | Starting at $750 | Step and counter flashing replacement on a brick chimney; price rises with chase height and rotted decking. |
| Skylight curb rebuild | Starting at $950 | Includes raising or rebuilding a low curb, new metal cap and sealed lens frame; access and roof pitch move the price. |
| Valley and dormer flashing | On estimate | Long runs and steep pitches need an on-site look before we can give a firm number. |
| Travel | Included | In Wichita Falls and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (940) 400-3876, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Residential entry or patio run | Starting at $1,200 | Covers a typical single-story run with seam or pad guards and sealed fastening. |
| Two-story or steep-pitch installation | Starting at $1,800 | Higher pitch and height add safety setup, staging and labor time to the job. |
| Bar-style guards on shops and barns | On estimate | Long eave runs and ag buildings need an on-site look before pricing. |
| Eave reinforcement and uplift clips | On estimate | Priced after we inspect existing fasteners, panel condition and edge framing. |
| Travel | Included | In Wichita Falls and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (940) 400-3876, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Free storm damage inspection | Free | Full roof walkover with date-stamped photos, fastener check and written findings |
| Minor repair (screws, sealant, small flashing) | Starting at $250 | Re-torque or replace fasteners, reseal pipe boots, patch small flashing joints; roof height affects price |
| Panel replacement and flashing rebuild | Starting at $650 | Replace creased or punctured panels, rebuild ridge caps and edge metal; scope and pitch move the price |
| Insurance documentation and adjuster meeting | Included | Photo file, written scope and on-site adjuster walkthrough for any repair or replacement claim |
| Travel | Included | In Wichita Falls and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (940) 400-3876, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard residential inspection | Free estimate | Walk inspection with written report, priced after we see roof size, pitch, and access. |
| Post-storm insurance inspection | Starting at $150 | Photo documentation and damage report for insurance claims, priced by roof size and number of slopes. |
| Pre-purchase inspection | Starting at $200 | Full condition report with remaining service life, priced by roof complexity and number of penetrations. |
| Drone or steep-pitch inspection | On estimate | Steep standing seam or unsafe conditions need an on-site look before we quote the scan. |
| Travel | Included | in Wichita Falls and surrounding towns, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (940) 400-3876, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| 5-inch seamless K-style gutter | Starting at $9/linear ft | Includes on-site roll forming, hangers and basic downspouts; run length and story height move the price. |
| 6-inch seamless for steep metal panels | Starting at $12/linear ft | Higher capacity for fast metal roof runoff; number of outlets and panel pitch affect the total. |
| Leaf guard installation | Starting at $6/linear ft add-on | Screen or reverse-curve cover sized for pecan and cedar elm debris; roof access and guard brand change the rate. |
| Fascia repair behind old hangers | On estimate | Soft or rotted wood has to be seen before a number makes sense; scope depends on how far damage runs. |
| Travel | Included | In Wichita Falls and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (940) 400-3876, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Free on-site estimate | Free estimate | Full roof measurement, panel plan and written scope included, with no obligation to book. |
| Exposed-fastener R-panel install | Starting at $4.50 per sq ft | Ribbed steel panels, fasteners and trim installed; pitch and purlin spacing move the rate. |
| Standing seam install | Starting at $8.00 per sq ft | Concealed-clip panels with raised seams; roof complexity and penetration count drive the price. |
| Repair and re-fastening | On estimate | Screw replacement, closure reset and panel tightening priced after we inspect the existing roof. |
| Travel | Included | In Wichita Falls and surrounding areas, no separate call-out or mileage fee. |
| Estimate response | Free | Response within 24 hours at (940) 400-3876, with no obligation to book. |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Wichita Falls need a crew that understands this climate, not a storm chaser passing through. Wichita Falls Metal Roofing is your local source for metal roof installation, replacement, re-roof, and repair on homes and outbuildings across the rolling North Texas plains. From the older bungalows and Craftsman cottages near downtown and Fairmont to the brick ranches of Southwest Wichita Falls and the acreage properties around Burkburnett, Iowa Park, Holliday, and Electra, we match the system to the structure and the weather it faces.
This is one of Texas' hardest hail corridors, and the wide-open prairie sky delivers big spring hailstorms, straight-line winds, and the occasional tornado warning. Add scorching summer sun and strong south winds that work fasteners loose, and you get a large stock of aging screw-down roofs that need honest attention. Whether you need a full Metal Roof Installation or a targeted repair, our network of licensed, insured local contractors delivers straight guidance and durable results.
Metal roofs are durable, but they are not maintenance-free. The most common failure we see on 15 to 30 year old exposed-fastener roofs is fasteners backing out as the EPDM sealing washers dry, shrink, and crack. Once that seal fails, water finds a path. Seam separation from thermal movement, failed pipe boots, and flashing gaps at chimneys, skylights, and valleys are close behind. Wind-lifted panels after a storm and punctures from fallen limbs round out the list. If you notice a leak, call (940) 400-3876 before small problems become structural ones.
Ignoring a leak lets water track along purlins and decking far from the entry point, which can rot sheathing and damage insulation before you see a stain on the ceiling. That is why we start with a thorough Metal Roof Leak Repair assessment rather than a sales pitch. Often, a full Screw Replacement & Re-Fastening service restores a watertight roof for a fraction of replacement cost, and we will tell you plainly when that is the right call.
The honest repair-versus-replace decision comes down to panel condition, decking integrity, and how many fasteners have already failed. If the panels are sound and the washers are the culprit, re-fastening is a smart investment. If the metal is corroded or the deck is soft, replacement may be the better long-term value. We document what we find and explain your options without pressure. Reach out through our free estimate page to schedule an inspection and get straight answers.
We install the full range of metal roofing systems, and we match the system to your home, your budget, and your long-term plans. Standing Seam Metal Roofing uses concealed clips and no exposed screws, making it the premium choice for low maintenance and clean lines. Corrugated & Ribbed Panel Roofing is the economical workhorse for cabins, barns, and workshops. We also install Metal Shingle Roofing, Stone-Coated Steel Roofing, and Copper & Specialty Metal Roofing for accents and distinctive homes.
The honest comparison is simple: standing seam costs more upfront and has no exposed screws to maintain, while screw-down costs less and needs fasteners serviced over its life. When the deck is sound, Metal Roof Over Shingles (Retrofit) is a legitimate option that saves on tear-off and disposal. When the deck is not sound, a full tear-off and Metal Roof Replacement is the right path. We will tell you which one fits your roof.
Metal roof pricing in Wichita Falls is typically quoted per square foot for installations, while repairs are often flat-rate. The final number depends on the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access. We frame all figures as typical ranges because no two roofs are the same, and final pricing depends on the roof and site conditions. Some carriers may offer premium discounts for metal or impact-rated roofs, but that is between you and your insurer.
For a clear picture of where your project falls, visit our pricing page and then request a free estimate or free roof inspection. We will walk the roof, document what we find, and give you straight numbers so you can compare repair, retrofit, and replacement honestly.
After a hailstorm or high wind, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. We simply give you the evidence you need to have an informed conversation with your insurance company.
On permits, in most jurisdictions a permit is commonly required for a full replacement or re-roof, but requirements vary by city, and thresholds, fees, and inspection requirements differ. Historic district or HOA design review can also restrict panel profile and color choices. Requirements vary, always verify with the Wichita Falls building or planning department before starting your project. For documentation and inspection requests, contact us through our contact page.
Ready to get started? Wichita Falls Metal Roofing serves in Wichita Falls and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Wichita Falls · Response within 24h · No commitment · ☎ (940) 400-3876
Your Free Quote Request