Serving the Wichita Falls area  ·  (940) 400-3876  ·  Open Mon-Sun 7am-7pm
📞 (940) 400-3876 Free Quote

Metal Roofing in Vernon, TX (76384) · Local Professionals

Wichita Falls Metal Roofing · Fast response in Vernon and the Wichita Falls area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+152Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Vernon is ranch country, and the roofs here show it. From the brick homes near the courthouse square to the metal barns and shops out on Highway 287, buildings in 76384 take a beating from hail, straight-line winds, and a sun that never quits. If your roof is tired, leaking, or just due for an upgrade, we can help.

We are Wichita Falls Metal Roofing, and we have been working on roofs across Wilbarger County and the surrounding area for years. Whether you are in a historic home near the downtown square or on acreage out toward Lockett, we know the local conditions and the local building department. Call us at (940) 400-3876 for a free inspection and estimate.

Metal Roofing in Vernon (76384)

Vernon sits on the rolling plains of North Texas, where the soil is a mix of red clay and sandy loam, and the wind rarely stops. The housing stock reflects that: older brick and frame homes near the downtown square, ranches with low-pitched roofs and carports, and a growing number of metal barns, shops, and oilfield-era buildings on the outskirts. Metal roofs are a natural fit here because they shed hail, resist wind uplift, and last for decades in the sun. But installation matters. Our team knows how to handle the expansive clay soils that can shift foundations, the tight lot lines in older neighborhoods, and the need for proper flashing around chimneys and skylights. We also understand the importance of using fasteners and panels that are rated for our local wind zone.

We have worked on everything from small repairs on a ranch house to full standing seam installations on new construction. Our experience in Vernon and the Wichita Falls area means we can spot the common failure points, like screw back-out on older panels or ice damming at the eaves on homes with steep pitches. We bring that knowledge to every job, and we are happy to share it with you.

Our services in Vernon

How a Job Works in Vernon

Step 1: You call us at (940) 400-3876 or fill out our contact form. We schedule a free on-site assessment at your convenience. One of our team members will inspect your roof, take measurements, and discuss your options. You will get a written estimate with clear pricing and no surprises.

Step 2: Once you approve the estimate, we pull the necessary permits from the City of Vernon (or the appropriate jurisdiction) and schedule the work. On installation day, our crew arrives early, protects your landscaping, and gets to work. For homes in older neighborhoods with tight lot lines, we plan ahead for material staging and access. We also coordinate with HOA requirements if applicable.

Step 3: After the work is done, we clean up thoroughly, haul away all debris, and walk the property with you to make sure you are satisfied. We do not consider a job finished until you are happy.

Pricing for metal roofing in Vernon depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are considering a retrofit over existing shingles, that starts at $7 per square foot. Repairs start at $450, and screw replacement or re-fastening starts at $750. We also offer metal roof coating and painting from $2.50 per square foot. For a precise quote, call us at (940) 400-3876. We provide free estimates and will walk you through all the options.

My brick home near the downtown square in Vernon has an old composition shingle roof. Can I install metal shingles over it?
In many cases, yes. Metal shingle roofing can often be installed over existing shingles if the roof deck is sound and local code allows it. However, Vernon has specific rules about the number of layers, so we always check with the city building department first. We will inspect your roof and let you know if a retrofit is a good option or if a full tear-off is better.
A storm just blew through Vernon and lifted some panels on my barn. How quickly can you respond?
We prioritize storm damage calls. Call us at (940) 400-3876 and we will schedule an inspection as soon as possible, often within 24 to 48 hours. We can tarp or secure the area to prevent further damage and provide a detailed estimate for repairs. We also work with insurance claims and can document the damage for you.
What does a typical metal roof repair cost in Vernon?
Most repairs start at $450, but the final cost depends on the extent of the damage and the type of metal roof. For example, replacing a few screws or fixing a small leak is on the lower end, while repairing flashing around a chimney or skylight may be higher. We give you a firm quote after inspecting the roof.
Do I need a permit for a metal roof replacement in Vernon?
Yes, roofing permits are commonly required for a full replacement or re-roof in Vernon. The exact requirements and fees vary, so we always verify with the City of Vernon building department before starting work. We handle the permit application for you as part of our service.
My neighbor and I share a property line, and my new metal roof will overhang slightly. What are the rules?
Property line overhangs can be a sensitive issue. In Texas, there are no statewide rules, but local ordinances and HOA covenants may apply. We recommend talking with your neighbor first. If there is an HOA, we can help you submit plans for approval. We also ensure that our installation respects property lines and does not create drainage problems for either party.
Are you fully insured for work on my Vernon property?
Yes, we are fully insured, carrying both general liability and workers' compensation insurance. We are happy to provide certificates of insurance upon request. This protects you and your property in the unlikely event of an accident.
What maintenance does a metal roof need in Vernon's climate?
Metal roofs are low maintenance, but in Vernon's hail and wind, it is wise to inspect annually, especially after major storms. Check for loose or missing screws, damaged panels, and debris in gutters. We offer inspection services and can replace screws and re-fasten panels to keep your roof in top shape. Call us to schedule a checkup.
Why choose us?

Trusted professionals in Wichita Falls

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Wichita Falls

All your work handled by qualified professionals in Wichita Falls

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

152+ Verified Client Reviews in Wichita Falls

⭐⭐⭐⭐⭐ 4.9/5 · 152 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Wichita Falls · Response within 24h · No commitment · ☎ (940) 400-3876

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Wichita Falls ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm