Serving the Wichita Falls area  ·  (940) 400-3876  ·  Open Mon-Sun 7am-7pm
📞 (940) 400-3876 Free Quote

Metal Roofing in Iowa Park, TX (76367) · Local Professionals

Wichita Falls Metal Roofing · Fast response in Iowa Park and the Wichita Falls area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+152Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Iowa Park is a town where most of the roofs are original to the house, and a lot of those houses went up between the 1960s and the 1980s. Brick ranches with low-pitch roofs and carports line the streets near Iowa Park High School and along Highway 287, and a good number of acreage properties out toward the lake and the oilfield roads still have their first layer of shingles. When the spring hail comes through, those older roofs take a beating.

Homeowners in Iowa Park (76367) call Wichita Falls Metal Roofing because we know this housing stock and we know what the weather does to it. We have put metal over shingles on dozens of brick ranches here, and we have replaced corrugated panels on shops and barns out past the city limits. If you are near the Iowa Park Library or anywhere in the 76367 ZIP, we can be on your roof this week.

Metal Roofing in Iowa Park (76367)

Iowa Park sits on the rolling North Texas plains, and the ground here is a mix of red clay and sandy loam. That matters for roofing because the clay holds water after a storm, and the sandy loam drains fast. On the older brick ranches, the low-pitch roofs and carports often have shallow slopes that do not shed water quickly, so we see a lot of ponding and fastener failures on those. Acreage homes and shops out on the county roads have wide-open exposure to south winds, and the corrugated and ribbed panels on those buildings work loose at the screws over time. We also deal with the occasional fallen limb from the pecans and cedar elms that are common on larger lots, and those punctures can be patched or the panel replaced without tearing off the whole roof.

Our team has worked in Iowa Park and the surrounding Wichita Falls area for years. We know which streets have tight driveways and which properties need a lift to get materials up to the roof. We also know that a lot of the brick ranches here have multiple layers of shingles, and code limits how many layers you can recover over, so we check that before we quote a metal roof over shingles.

Our services in Iowa Park

How a Job Works in Iowa Park

Step 1: You call us at (940) 400-3876 or fill out the form, and we set up a free on-site assessment. We walk the roof, check the decking and flashing, and look at the attic if you have one. We give you a written estimate the same day or the next, and we explain the options that fit your house and your budget.

Step 2: Once you approve, we pull the permit with the City of Iowa Park if one is required. We schedule the work around the weather, which in this part of Texas means watching the spring hail season and the summer heat. On tight lots near downtown Iowa Park, we stage materials in the driveway and use a conveyor to get panels up to the roof without tearing up your yard. If your neighborhood has an HOA or you are in a historic district, we help you get the color and profile approved before we order materials.

Step 3: When the job is done, we clean up. We magnet-sweep the yard for nails, haul off the old shingles and debris, and do a final walkthrough with you to make sure you are satisfied. We do not leave until you have looked at the roof and signed off.

Pricing in Iowa Park depends on the size of your roof, the pitch, how many layers of shingles are already there, and how easy it is to get to the roof. For a typical brick ranch, metal roof over shingles starts at $7 per square foot, and a full replacement starts at $9 per square foot. Standing seam runs about $10 per square foot, and corrugated or ribbed panel roofing starts at $5.50 per square foot, which is common for shops and barns. Repairs start at $450, and screw replacement and re-fastening starts at $750. We give free estimates, so call (940) 400-3876 and we will come out and give you a real number, not a guess.

My brick ranch near Iowa Park High School has two layers of shingles. Can you still do a metal roof over shingles?
Probably, but it depends on the condition of the shingles and the decking. Code in Iowa Park limits how many layers you can recover over, so we check that first. If the shingles are sound and the deck is solid, we can often install a metal roof over them and save you the cost of tear-off. We will tell you honestly if a full tear-off is the better option.
A storm just blew through Iowa Park and lifted some panels on my shop. How fast can you get out there?
We prioritize storm damage calls in Iowa Park and the surrounding area. Call us at (940) 400-3876 and we will schedule an inspection, often within a day or two. If there is an active leak, we can do a temporary patch to stop the water until we can make the permanent repair.
What does a metal roof cost for a typical three-bedroom ranch in Iowa Park?
For a 1,500 to 2,000 square foot ranch, metal roof over shingles usually runs between $10,500 and $14,000, and a full replacement runs between $13,500 and $18,000. Standing seam is a bit more. The exact price depends on the pitch, the number of penetrations, and the condition of the decking. We give free estimates so you can get a firm number.
Do I need a permit to replace my roof in Iowa Park?
Roofing permits are commonly required for a full replacement or re-roof in Iowa Park, and the rules can vary. We handle the permit application and inspections for you, and we make sure the work meets the current code. If you are in a historic district or an HOA, there may be additional design review, and we help you navigate that too.
My neighbor's tree hangs over my roof. Can I trim it, and will my HOA care about the color of my new metal roof?
In Texas, you generally have the right to trim branches that overhang your property line, but you should check with your neighbor first and make sure you do not damage the tree. As for the HOA, many neighborhoods in Iowa Park have design guidelines for roof color and profile. We can provide color samples and documentation to help you get approval before we order materials.
Are you insured for work on my property in Iowa Park?
Yes, we are fully insured with general liability and workers' compensation coverage. We can provide a certificate of insurance before we start any work on your property.
What should I do to maintain my metal roof in Iowa Park between hail seasons?
Check the fasteners and seams after any big storm, and look for loose screws or lifted panels. Keep debris off the roof, especially around chimneys and valleys. We offer inspections and maintenance plans, and we can replace screws and re-fasten panels before they become a leak. Call us at (940) 400-3876 to schedule a checkup.
Why choose us?

Trusted professionals in Wichita Falls

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Wichita Falls

All your work handled by qualified professionals in Wichita Falls

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

152+ Verified Client Reviews in Wichita Falls

⭐⭐⭐⭐⭐ 4.9/5 · 152 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Wichita Falls · Response within 24h · No commitment · ☎ (940) 400-3876

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Wichita Falls ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm