Serving the Wichita Falls area  ·  (940) 400-3876  ·  Open Mon-Sun 7am-7pm
📞 (940) 400-3876 Free Quote

Metal Roofing in Holliday, TX (76366) · Local Professionals

Wichita Falls Metal Roofing · Fast response in Holliday and the Wichita Falls area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+152Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Holliday is a small farm town where the whistle of a train and the rumble of a truck on Highway 82 are about as loud as it gets. Most homes here sit on generous lots with mature pecans and mesquites, and many still have the original composition shingle roofs from the 1970s or 1980s, plus a shop or barn out back that takes a beating from the North Texas sun and hail.

That is why homeowners in Holliday (76366) call Wichita Falls Metal Roofing. We know the difference between a house near Holliday Elementary and a metal shop off FM 368, and we bring the right materials and fasteners for each. Whether it is a leak over the back porch or a full replacement on a ranch house, we treat your property like it is down the road from our own.

Metal Roofing in Holliday (76366)

Holliday sits on rolling plains with red clay and sandy loam, and that ground moves with the seasons. In a dry summer, the clay shrinks and pulls away from foundations; after a spring storm, it swells and pushes. For roofs, the bigger issue is the wide-open exposure: south winds that never seem to stop, hail that comes in sideways, and dust that works its way into every seam. The housing stock here reflects that. You have older frame and brick homes near downtown Holliday with steep gables and small eaves, 1960s and 70s brick ranches with low-slope roofs and carports, and acreage properties with metal barns, shops, and oilfield-era buildings that need heavy-duty panels. We see a lot of screw back-out on those outbuildings, and we see shingle roofs on the houses that have lost granules and are one storm away from a leak. Our team has worked on all of these, from standing seam on a new build to retrofit over shingles on a tight budget. We know how to handle the tight turns around chimneys and the long runs on a shop roof without leaving gaps.

We have been serving Holliday and the surrounding Wichita Falls area for years, and we understand the local building department, the inspection process, and what insurance adjusters look for after a hail event. We are fully insured with general liability and workers' compensation, so you are covered if anything goes wrong on your property.

Our services in Holliday

How a Job Works in Holliday

Step 1: You call us at (940) 400-3876 or fill out the form, and we schedule a free on-site assessment. We will walk your roof, check the flashing, fasteners, and panels, and take photos. We will also look at your attic and gutters if you want. Then we give you a written estimate with options, not pressure.

Step 2: Once you approve, we pull the permit if one is required by the city or county. In Holliday, most full replacements need a permit, and we handle that for you. We schedule the work around your weather window, because we do not want to tear off a roof and leave it open when a thunderstorm is forecast. On tight lots or properties with a long driveway, we stage materials carefully so we do not block access. For homes in a historic district or with an HOA, we help you get the design approval before we order panels.

Step 3: When the job is done, we clean up every nail and scrap. We use a magnet sweep over the lawn and driveway. Then we walk the roof with you, show you the finished work, and make sure you know how to maintain it. We do not leave until you are satisfied.

Pricing in Holliday depends on the size and pitch of your roof, the material you choose, and how much prep work is needed. For a typical ranch home, metal roof installation starts at $8 per square foot, and standing seam starts at $10 per square foot. If you are replacing an existing roof, that starts at $9 per square foot, and a retrofit over shingles starts at $7 per square foot. For smaller jobs, metal roof repair starts at $450, and screw replacement and re-fastening starts at $750. We also offer metal roof coating and painting from $2.50 per square foot, which can extend the life of an older roof. Every estimate is free, and we will give you a clear breakdown so you can compare. Call (940) 400-3876 to schedule your free estimate in Holliday.

My house is near Holliday Elementary, and the roof is original to the 1970s. Is it worth switching to metal?
Yes, especially in this hail corridor. A 1970s shingle roof has likely been through many storms and is near the end of its life. Metal will handle hail better, reflect summer heat, and last decades longer. We can show you options that fit the look of your neighborhood, from standing seam to stone-coated steel that mimics shingles.
A storm just blew through and lifted some panels on my shop roof. Can you come out today?
We prioritize storm damage calls. Call us at (940) 400-3876, and we will schedule an inspection as soon as possible. We can often tarp or secure the roof temporarily to prevent further water damage, then give you a repair estimate.
What does a metal roof cost for a typical three-bedroom ranch in Holliday?
For a 1,500 to 2,000 square foot ranch, most metal roof installations run between $12,000 and $20,000 depending on the material and complexity. Standing seam is at the higher end, while corrugated or R-panel is more affordable. We provide a free estimate so you know exactly what your roof will cost.
Do I need a permit for a metal roof in Holliday?
Yes, the city of Holliday typically requires a permit for a full roof replacement. Requirements can vary, so we always check with the local building department before starting. We handle the paperwork for you.
My neighbor and I share a property line, and my new metal roof might overhang slightly. What are the rules?
In Texas, you generally have the right to install a roof that overhangs your property line by a few inches, but it is best to talk with your neighbor first. If there is an HOA, check its rules on setbacks and roof profiles. We can help you understand the local requirements and coordinate with your neighbor if needed.
Are you insured for work on my property?
Yes, we are fully insured with general liability and workers' compensation. We can provide a certificate of insurance before we start any work.
What should I do to maintain my metal roof in Holliday between storms?
Check the fasteners once a year, especially after a hail event. Look for loose screws or backed-out washers and replace them. Keep gutters clear of debris, and trim tree limbs away from the roof. If you see any signs of rust or seam separation, call us for a quick inspection. We also offer coating services that can extend the life of your roof.
Why choose us?

Trusted professionals in Wichita Falls

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Wichita Falls

All your work handled by qualified professionals in Wichita Falls

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

152+ Verified Client Reviews in Wichita Falls

⭐⭐⭐⭐⭐ 4.9/5 · 152 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Wichita Falls · Response within 24h · No commitment · ☎ (940) 400-3876

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Wichita Falls ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm