Serving the Wichita Falls area  ·  (940) 400-3876  ·  Open Mon-Sun 7am-7pm
📞 (940) 400-3876 Free Quote

Metal Roofing in Petrolia, TX (76377) · Local Professionals

Wichita Falls Metal Roofing · Fast response in Petrolia and the Wichita Falls area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+152Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Petrolia is a small, proud community just west of Wichita Falls, where the land opens up into rolling prairie and the housing stock tells its own story: 1950s-70s brick ranches on generous lots, a handful of older frame homes near the center of town, and acreage properties with metal barns and shops dotting the outskirts. The terrain is classic North Texas red clay and sandy loam, with mesquite and cedar elm breaking up the big skies, and the wind never seems to stop. If you live here, you know the hail that rolls through in spring and the dust-orange sunsets that follow.

When your roof starts leaking or you're ready to upgrade to metal, you want a contractor who understands Petrolia's specific challenges. That's why homeowners in 76377 call Wichita Falls Metal Roofing. We've worked on everything from the low-pitched carports off Highway 79 to the metal shops on the edge of town, and we know how to handle the wind, the hail, and the wide-open exposure that defines this part of Clay County.

Metal Roofing in Petrolia (76377)

Petrolia properties come with their own set of roofing realities. Many homes sit on large lots with mature trees, which means fallen limbs and debris are a constant threat to shingles and panels. The soil here shifts with the seasons, and that movement can work fasteners loose over time, especially on older outbuildings and shops. We see a lot of corrugated and ribbed panel roofs on barns and agricultural buildings, and those panels take a beating from straight-line winds and hail. When we install or repair a metal roof here, we pay attention to the little things: proper screw selection with neoprene washers, correct overlap for our wind zone, and flashing details that keep water out of the eaves and valleys. The wide-open prairie means your roof is fully exposed to sun and wind, so we make sure every panel is fastened to code and built to last.

Our team has been serving Petrolia and the surrounding Wichita Falls area for years. We've worked in the older neighborhoods near downtown Petrolia, on the ranches out toward Henrietta, and on commercial buildings along the highway. We know the local suppliers, the permit office, and the weather patterns that affect your roof. Whether you need a full replacement or a quick repair, we bring that local knowledge to every job.

Our services in Petrolia

How a Job Works in Petrolia

Step 1: It starts with a phone call to (940) 400-3876 or a request through our website. We'll schedule a free on-site assessment at your Petrolia property, usually within a day or two. We'll inspect your roof, take measurements, and talk through your options. You'll get a written estimate with clear pricing, no surprises.

Step 2: Once you approve the estimate, we schedule the work. For most jobs in Petrolia, we can start within a week or two, depending on weather and material availability. We handle the permit process with the city, and we coordinate with your schedule. On installation day, our crew arrives early, protects your landscaping, and gets to work. We use local suppliers when possible, and we keep you informed on progress.

Step 3: After the work is done, we do a thorough cleanup. We magnet-sweep for nails, haul away old materials, and make sure your yard is as clean as we found it. Then we walk the roof with you, show you what we did, and answer any questions. We don't leave until you're satisfied.

Pricing for metal roofing in Petrolia depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. For a typical 1,500-square-foot ranch home, a corrugated or ribbed panel roof might start around $5.50 per square foot, while standing seam runs closer to $10 per square foot. A full replacement with metal over shingles (retrofit) can start at $7 per square foot. Smaller repairs, like fixing a leak or replacing screws, often run $450 to $750. We always provide a free estimate so you know exactly what to expect. Call us at (940) 400-3876 to schedule yours.

My barn near Petrolia has corrugated panels that are pulling loose at the screws. Can you fix that without replacing the whole roof?
Yes, we can. Screw replacement and re-fastening is one of our most common jobs in the Petrolia area. We'll inspect the panels, replace any damaged screws with new ones that have proper neoprene washers, and tighten the rest to manufacturer specs. If the panels themselves are damaged, we can replace individual sheets. We'll give you a free estimate and let you know if a full replacement makes more sense.
A storm just blew through Petrolia and lifted some panels on my roof. How quickly can you get out here?
We prioritize storm damage calls in Petrolia and the surrounding area. In most cases, we can have someone out within 24 to 48 hours for an inspection and temporary repair if needed. Call us at (940) 400-3876 and we'll get you on the schedule as soon as possible.
What's the typical cost to replace a metal roof on a 2,000-square-foot home in Petrolia?
For a 2,000-square-foot home, a basic corrugated panel roof might run $11,000 to $15,000, while standing seam could be $20,000 to $25,000. The exact price depends on roof pitch, number of penetrations, and whether we're removing the old roof. We provide free estimates so you get an accurate number for your specific home.
Do I need a permit for a metal roof replacement in Petrolia?
Yes, the City of Petrolia typically requires a permit for a full roof replacement. Requirements can vary, so we always check with the local building department before starting work. We handle the permit application and inspections for you, so you don't have to worry about the paperwork.
My neighbor's tree hangs over my property line and drops limbs on my roof. Can I trim it, and will my HOA care if I switch to a metal roof?
In Texas, you generally have the right to trim branches that overhang your property line, but it's best to talk to your neighbor first. As for HOA rules, some neighborhoods in Petrolia have design guidelines that may restrict metal roof styles or colors. We can help you navigate that by providing product samples and specifications to submit for approval.
Are you fully insured for roofing work in Petrolia?
Yes, we carry general liability insurance and workers' compensation coverage. We're happy to provide certificates of insurance before we start any work on your property.
What should I do to maintain my metal roof in Petrolia between hail seasons?
We recommend an annual inspection, especially after spring storms. Check for loose screws, debris in valleys, and any signs of rust or damage. Keep trees trimmed back, and wash the roof occasionally to remove dirt and pollen. If you see anything concerning, give us a call at (940) 400-3876 for a free assessment.
Why choose us?

Trusted professionals in Wichita Falls

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Wichita Falls

All your work handled by qualified professionals in Wichita Falls

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

152+ Verified Client Reviews in Wichita Falls

⭐⭐⭐⭐⭐ 4.9/5 · 152 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Wichita Falls · Response within 24h · No commitment · ☎ (940) 400-3876

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Wichita Falls ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm