Serving the Wichita Falls area  ·  (940) 400-3876  ·  Open Mon-Sun 7am-7pm
📞 (940) 400-3876 Free Quote

Metal Roofing in Seymour, TX (76380) · Local Professionals

Wichita Falls Metal Roofing · Fast response in Seymour and the Wichita Falls area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+152Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Seymour, Texas, is a prairie town where the wind never stops and the sun bakes roofs year-round. Most homes here are modest brick or frame houses built from the 1920s through the 1970s, many with low-pitched roofs and carports, sitting on flat lots with alley access. The wide-open sky and red clay soil are part of life here, and so is hail.

When Seymour homeowners in ZIP 76380 need a roof that can take a beating, they call Wichita Falls Metal Roofing. We know the housing stock here, from the older homes near downtown Seymour to the brick ranches out on Highway 82. We also know that after a big spring hailstorm, you need a roofer who can get out there fast and give you a straight answer.

Metal Roofing in Seymour (76380)

Seymour sits on the rolling plains of Baylor County, where the soil is a mix of red clay and sandy loam. That means drainage matters. When it rains hard, water runs fast, and if your roof or gutters aren't set up right, you'll get erosion around the foundation. Most lots in town are flat and rectangular, with detached garages or shops in the back. Access is usually easy, but some of the older neighborhoods have narrow driveways and mature pecan trees that drop limbs. We plan for that.

The bigger challenge here is weather. Seymour is right in the heart of Texas hail country. Spring storms roll in with big hail, straight-line winds, and the occasional tornado warning. Those winds work on screws and fasteners, and over time they can loosen panels or tear off shingles. That's why more and more homeowners here are switching to metal, especially corrugated and ribbed panel roofing, which handles hail and wind better than asphalt shingles. We've installed metal roofs on everything from small bungalows near the courthouse to large shops and barns out on the edge of town. Our team knows how to work with the local building department and can help you understand what's allowed for your property.

Our services in Seymour

How a Job Works in Seymour

Step 1: You call us at (940) 400-3876 or fill out our online form. We'll schedule a free on-site assessment at your Seymour property. We'll look at your current roof, check for damage, and talk through your options, whether that's a repair, a full replacement, or a metal roof over your existing shingles. We'll also check for any permit requirements with the City of Seymour.

Step 2: Once you approve the estimate, we order materials and schedule the work. Most jobs in Seymour take one to three days, depending on the size and complexity. We'll protect your landscaping and keep the site tidy. If your home is in a historic district or has HOA rules, we'll help you navigate the approval process. And if you have a tight driveway or limited access, we'll plan accordingly.

Step 3: When the work is done, we do a thorough cleanup. We magnet-sweep for nails and haul away all debris. Then we walk the roof with you to make sure you're happy with the result. We don't leave until you're satisfied.

We believe in straight pricing. For Seymour homeowners, metal roof installation typically starts around $8 per square foot, with standing seam starting at $10 per square foot. A metal roof replacement starts at $9 per square foot, and if you want to go over your existing shingles, that starts at $7 per square foot. For smaller jobs, metal roof repair starts at $450, and screw replacement and re-fastening starts at $750. Corrugated and ribbed panel roofing, which is popular on shops and barns around Seymour, starts at $5.50 per square foot. The final price depends on the size of your roof, its current condition, access, and how soon you need it done. Call us at (940) 400-3876 for a free estimate. We'll give you a clear, written quote with no surprises.

My house is near the Baylor County Courthouse in downtown Seymour. Can I get a metal roof that fits the historic look?
Yes. We work with you and the city to choose a panel profile and color that respects the historic character of downtown Seymour. Some profiles, like standing seam, can mimic the look of traditional metal roofs, and we can help you with any design review requirements.
A storm just blew through Seymour and I think my roof is damaged. How fast can you get out to inspect it?
We offer free storm damage inspections and prioritize emergency calls after major storms. Call us at (940) 400-3876 and we'll schedule a visit as soon as possible. We'll document any damage for your insurance claim and give you a repair estimate.
What's the typical cost for a metal roof replacement on a 1,500 square foot home in Seymour?
For a home that size, a basic metal roof replacement might start around $9 per square foot, but the total depends on the pitch, the number of penetrations, and whether we need to remove the old roof. Most homeowners in Seymour spend between $13,000 and $20,000 for a full replacement. Call us for a free estimate tailored to your home.
Do I need a permit from the City of Seymour to replace my roof?
Yes, the City of Seymour typically requires a permit for a full roof replacement or re-roof. The requirements and fees vary, so we always check with the local building department before starting work. We can handle the permit application for you.
My neighbor's tree branches hang over my roof. What can I do about it?
In Texas, you generally have the right to trim branches that overhang your property line, but it's best to talk to your neighbor first. If the tree is on their property and poses a risk to your roof, we can advise on the best approach and even provide a letter for your records. For HOA issues, we can help you coordinate with the board.
Are you fully insured for roofing work in Seymour?
Yes, we carry general liability insurance and workers' compensation coverage. We're happy to provide a certificate of insurance for your records. You can have peace of mind knowing that your property and our crew are protected.
What maintenance does a metal roof need in Seymour's climate?
Metal roofs are low maintenance, but in Seymour's hail and wind, it's smart to have your roof inspected annually. We check fasteners, seals, and flashing, and we can replace any damaged screws. Also, keep gutters clear of debris, especially after storms, to prevent water backup. Call us to schedule a maintenance check.
Why choose us?

Trusted professionals in Wichita Falls

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Wichita Falls

All your work handled by qualified professionals in Wichita Falls

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

152+ Verified Client Reviews in Wichita Falls

⭐⭐⭐⭐⭐ 4.9/5 · 152 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Wichita Falls · Response within 24h · No commitment · ☎ (940) 400-3876

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Wichita Falls ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm