Metal roofing prices in Wichita Falls typically range from $5.50 to $20 per square foot for materials and installation, depending on the metal type, roof complexity, and whether you are replacing, retrofitting, or repairing. Many homeowners find that while the upfront cost is higher than asphalt shingles, metal roofing's durability and energy efficiency can make it a smart long-term investment. We believe in transparent pricing, so you always know what to expect before work begins.
Pricing guide
These rates are indicative. Every job is unique: size, access, complexity. Request a free estimate for exact pricing tailored to your situation.
| Service | Price | Details |
|---|---|---|
| Metal Roof Installation | From $8/sq ft | Complete metal roof installation for homes across Wichita Falls and the Red River country: panel systems engineered for big North Texas hail, intense summer sun and prairie wind; installed over high-temperature synthetic underlayment with proper ventilation, and flashing details built for a 40-60 year service life. |
| Standing Seam Metal Roofing | From $10/sq ft | Concealed-fastener standing seam systems, the premium choice for Wichita Falls homes. Panels are roll-formed to length and mechanically seamed or snap-locked, with no exposed screws to loosen under hot sun and strong south winds. Superior wind resistance, impact-rated options for hail and a cool reflective finish. |
| Metal Roof Replacement | From $9/sq ft | Full tear-off and replacement of hail-beaten, sun-baked shingle or end-of-life metal roofs: old roofing hauled away, decking inspected and repaired, then a complete new metal system installed. Many insurers offer discounts for impact-rated roofs in hail country, so ask yours. |
| Metal Roof Over Shingles (Retrofit) | From $7/sq ft | A new metal roof installed directly over your existing asphalt shingles, with no tear-off, less waste and lower cost. Popular on Wichita Falls ranch homes. We check deck condition first and tell you honestly when tear-off is the better call after hail. |
| Metal Roof Repair | From $450 | Repair of damaged, loose or storm-hit metal roofing: replacing hail-dented or punctured panels, resealing seams and penetrations, and fixing failed flashing before a North Texas thunderstorm turns a small gap into interior damage. |
| Metal Roof Leak Repair | From $450 | Priority leak response for metal roofs: leaks traced to their true source (failed fasteners, seam separation, flashing gaps, pipe boots and wall transitions) and fixed right, not just caulked over. Emergency tarping available after hail and heavy thunderstorm rain. |
| Screw Replacement & Re-Fastening | From $750 | Wichita Falls' hot sun, strong south winds and big day-to-night swings expand and contract metal roofs constantly, so screws back out and sun-baked washers crack on older exposed-fastener roofs. Oversized screws and UV-resistant washers fix it for a fraction of replacement cost. |
| Corrugated & Ribbed Panel Roofing | From $5.50/sq ft | Exposed-fastener metal roofing (corrugated, R-panel and 5V), the budget-friendly workhorse for homes, carports, barns and workshops across Wichita County and the Red River plains. Quality panels in reflective cool-roof colors, installed with proper screw patterns and closures that keep out wind-driven dust and rain. |
| Metal Shingle Roofing | From $9/sq ft | Metal shingles that deliver the look of architectural shingles, slate or shake with the lifespan of steel, a favorite for Wichita Falls homeowners who want metal performance without the standing seam look. Lightweight, walkable and wind-rated for prairie gusts. |
| Stone-Coated Steel Roofing | From $9/sq ft | Stone-coated steel systems combining steel strength with a textured traditional finish: excellent hail and wind performance, a Class A fire rating and profiles that mimic the architectural shingle and shake looks common on Wichita Falls homes. |
| Copper & Specialty Metal Roofing | From $20/sq ft | Copper, zinc and aluminum roofing for accents, porches, bay windows and full architectural roofs: premium metals that develop a living patina and last a century in North Texas weather. Custom fabrication for the fine details on older Wichita Falls homes. |
| Metal Roof Coating & Painting | From $2.50/sq ft | Restoration of sun-faded, chalking or surface-rusted metal roofs: surface prep, rust treatment and high-performance reflective coating systems that extend roof life 10-15 years, restore color and cut summer heat gain without replacement. |
| Flashing, Chimney & Skylight Repair | From $600 | Repair and custom fabrication of flashing around chimneys, skylights, valleys, dormers and brick transitions, the number one leak point on Wichita Falls roofs after hail. In-house bent flashing for a precise watertight fit. |
| Snow Guards & Ice Protection | From $1,200 | Snow guards are rarely needed in Wichita Falls, so this service covers what prairie storms demand instead: hail-minded details, reinforced eave, rake and ridge fastening and wind-uplift clips for steep metal roofs over entries and patios. Honest guidance on what your roof really needs. |
| Storm & Wind Damage Repair | Free inspection | Repair of hail, wind and tornado-warned thunderstorm damage to metal roofing: thorough documentation with photos, an honest assessment of repair versus replacement, and help documenting your insurance claim from inspection to completed work. |
| Metal Roof Inspection | Free estimate | Complete metal roof inspections for homeowners, buyers and insurance requirements: fastener condition, seam integrity, flashing, coating wear, hail impact marks and UV wear, and a straight answer on remaining service life with a written report. |
| Gutters for Metal Roofs | From $9/linear ft | Seamless gutter systems sized and mounted correctly for metal roofing: hangers that work with panel profiles and downspouts that carry sudden North Texas downpours away from brick walls and foundations on shifting clay, with details that handle dust and pecan leaves. |
| Commercial & Agricultural Metal Roofing | Free estimate | Metal roofing for barns, workshops, churches, carports, oilfield service buildings and light commercial buildings across Wichita County and the Red River plains, from cattle barns and hay sheds in Archer and Clay counties to Wichita Falls shops, with durable panel systems and repairs. |
What Affects the Price
- Roof size and pitch : Larger roofs and steeper pitches require more materials and labor, increasing the overall cost.
- Metal type and gauge : Premium metals like copper or stone-coated steel cost more than standard corrugated panels, and thicker gauges add durability but also expense.
- Accessibility and tear-off : Difficult access, multiple stories, or the need to remove old roofing adds labor time and disposal fees.
- Repair vs. replacement : Minor repairs like leak fixes start at $450, while full replacements or retrofits involve higher material and labor costs.
What's included
- Travel included across the Wichita Falls area
- Professional labor & equipment
- Old roofing tear-off & haul-away
- Job site cleanup
- Written estimate before work begins
To get an accurate estimate, have your roof's approximate square footage and any known issues ready before you call. A Wichita Falls Metal Roofing estimator will inspect your roof, discuss material options, and provide a detailed written quote that includes labor, materials, and cleanup. Call (940) 400-3876 to schedule your free estimate and ask about current specials.
Pricing FAQ
Why do metal roofing prices vary so much?
Prices vary based on metal type (e.g., corrugated steel vs. copper), roof complexity (pitch, number of penetrations), labor rates, and whether you need a full replacement, retrofit, or repair. For example, corrugated panel roofing starts at $5.50 per square foot, while copper specialty roofing starts at $20 per square foot.
Do you offer free estimates, and how soon can I get an appointment?
Yes, we provide free estimates for metal roof inspections and storm damage assessments. Call (940) 400-3876 to schedule a convenient time; we often have same-week availability.
What payment methods do you accept, and is financing available?
We accept cash, checks, and major credit cards. Financing options are available for larger projects, subject to credit approval. Ask your estimator for details during your free consultation.